The MaxLiner™ system provides cost-effective rehabilitation of small diameter pipes in industrial, commercial and residential areas. The MaxLiner™ System is an inversion system that allows you to repair pipes by relining them, as opposed to replacing them. Based on the existing conditions, a custom-designed liner tube is impregnated with epoxy and can then be inverted or pulled into the existing pipe. Resins are selected according to the job requirements and based on the inversion table. The liner materials are selected depending on the pipe condition. Standard liner tubes are used for straight pipes and more flexible tubes are used for pipes with severe bends, angles and transitions from smaller to larger diameters. Once the resins are selected, the curing process can be done at ambient temperatures or by adding heat which allows the curing process to be shortened to just one hour.